Product ID:YELLOW PROTOPET 2A, 384 0203A
MSDS Date:07/18/1994
FSC:9150
NIIN:01-165-9347
MSDS Number: CHCBW

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 412-756-2210

Preparer: KENNETH BLAIR

Cage: 5H954

Telephone: 713-975-5858

Cage: 5H954

MIXTURE OF HYDROCARBONS REFINED FROM PETROLEUM

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: UNDER NORMAL USE
CONDITIONS NO ABSORPTION THROUGH THE SKIN, BY INHALATION OR OTHER
ROUTE OF ENTRY INTO THE HUMAN BODY IS ANTICIPATED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FOR MOLTEN PRODUCT ONLY, IMMEDIATELY FLUSH WITH LARGE
QUANTITIES OF WATER FOR AT LEAST 15 MINUTES & CALL MD. SKIN: IF
BURNED BY CONTACT WITH HOT MATERIAL, COOL BURNED SKIN AREA AS
QUICKLY AS POS SIBLE BY IMMERSING IN COLD WATER, OR APPLYING COLD
WATER. CALL MD. INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE OXYGEN OR ARTIFICIAL RESPIRATION) . INGESTION: CONTACT MD
IMMEDIATELY.

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:DRY CHEMICAL, WATER FOG, CARBON DIOXIDE, FOAM,
SAND/EARTH. CLOSED CONTAINERS EXPOSED TO FIRE MAY BE COOLED WITH
WATER.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:SHUT OFF LEAK AND DIKE UP LARGE SPILLS. AFTER
COOLING AND SOLIDIFICATION, SCRAPE AND/OR SHOVEL UP MATERIAL.
FINALLY, CLEAN AREA WITH AN OIL ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT AND FLAMES. DO NOT
STORE NEAR STRONG OXIDIZING AGENTS. MAXIMUM STORAGE TEMPERATURE:
200F (93C).
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE. USE NIOSH APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:HEAT PROTECTIVE IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . COVERALLS WHEN HANDLING MOLTEN PRODUCT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>100F,>38C
Vapor Pres:<0.0005
Spec Gravity:<1 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:WHITE AMBER OPAQUE SEMI-SOLID WITH NO ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE, AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
FROM BURNING.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.